tdc hpr1xxw, Elektronika, Zasilacze i przetwornice AC-DC DC-DC noty katalogowe EDW, Noty zasilacze, Murata Power ...
[ Pobierz całość w formacie PDF ]
HPR1XXWC Series
0.75 Watt Single Output DC/DC Converter
FEATURES
n
Low Cost
n
Multiple Package Styles
n
Internal Input and Output
n
Filtering
n
Non-Conductive Case
n
High Output Power Density: 10 Watts/Inch3
n
Extended Temperature Range: -25°C to +85°C
n
Eficiency to 79%
n
RoHS Compliant
The HPR1XXWC Series uses advanced circuit design and packaging technology to deliver superior reliabil-
ity and performance. A 170kHz push-pull oscillator is used in the input stage. Beat-frequency oscillation
problems are reduced when using the HPR1XXWC Series with high frequency isolation ampliiers.
Reduced parts count and high eficiency add to the reliability of the HPR1XXWC Series. The high
eficiency of the HPR1XXWC Series means less internal power dissipation, as low as 190mW.
With reduced heat dissipation the HPR1XXWC Series can operate at higher temperatures with no
degradation. In addition, the high eficiency of the HPR1XXWC Series means the series is able to offer
greater than 10 W/inch3 of output power density. Operation down to no load will not impact the reli-
ability of the series, although a >1mA minimum load is needed to realize published speciications.
The HPR1XXWC Series provides the user a low cost converter without sacriicing reliability. The use
of surface mounted devices and advanced manufacturing technologies make it possible to offer
premium performance and low cost.
All speciications are typical at TA = +25°C nominal input voltage unless otherwise speciied.
pRoduCt SeleCtioN CHaRt
NomiNal
Rated
Rated
iNput CuRReNt
RefleCted
iNput
output
output
Ripple
Voltage
Voltage
CuRReNt
No load
Rated load
CuRReNt
effiCieNCy
model
(VdC)
(VdC)
(ma)
(ma)
(ma)
(map-p)
(%)
HPR100WC
5
5
150
20
216
10
69
HPR101WC
5
12
62
20
212
5
70
HPR102WC
5
15
50
20
212
5
71
HPR103WC
5
±5
±75
20
218
5
68
HPR104WC
5
±12
±30
20
212
5
68
HPR105WC
5
±15
±25
20
200
5
75
HPR106WC
12
5
150
10
90
5
69
HPR107WC
12
12
62
10
81
5
77
HPR108WC
12
15
50
10
81
5
77
HPR109WC
12
±5
±75
10
88
5
71
HPR110WC
12
±12
±30
10
81
5
74
HPR111WC
12
±15
±25
10
81
5
77
HPR112WC
15
5
150
8
72
5
69
HPR113WC
15
12
62
8
72
5
69
HPR114WC
15
15
50
8
72
5
69
HPR115WC
15
±5
±75
8
72
5
69
HPR116WC
15
±12
±30
8
63
5
76
HPR117WC
15
±15
±25
8
63
5
79
HPR118WC
24
5
150
8
48
15
65
HPR119WC
24
12
62
8
48
15
65
HPR120WC
24
15
50
8
45
15
76
HPR121WC
24
±5
±75
8
45
15
69
HPR122WC
24
±12
±30
8
45
15
67
HPR123WC
24
±15
±25
8
45
15
69
Note: Other input to output voltages may be available. Please contact Murata Power Solutions.
Ḥ
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com
Technical enquiries email: sales@murata-ps.com, tel:
+1 508 339 3000
TDC_HPR1xxWC.B01 Page 1 of 4
HPR1XXWC Series
0.75 Watt Single Output DC/DC Converter
SpeCifiCatioNS, all modelS
Speciications are at T
A
= +25°C nominal input voltage unless otherwise speciied.
paRameteR
CoNditioNS
miN
typ
max
uNitS
iNput
Voltage Range
4.5
5
5.5
VDC
10.8
12
13.2
VDC
13.5 15 16.5 VDC
21.6 24 26.4 VDC
Voltage Rise Time See Typical Performance Curves & Application Notes: “Capacitive Loading Effects on Start-Up of DC/DC Converters”
output
Rated Power
750
mW
Voltage Setpoint Accuracy
Rated Load, Nominal V
IN
±5
%
Ripple & Noise
BW = DC to 10MHz
150
200
mVp-p
BW =10Hz to 2MHz
30
40
mVrms
Voltage (Over Input Voltage Range) 1mA to Rated Current, V
OUT
= 5V
4.75
7
VDC
1mA to Rated Current, V
OUT
= 12V
11.40
15
VDC
1mA to Rated Current, V
OUT
= 15V
14.25
18
VDC
Temperature Coeficent
.01
.05
%/ °C
RegulatioN
Load Regulation (All other modes)
Rated Load to 1mA Load
3
%
geNeRal
ISOLATION
Rated Voltage
750
VDC
Test Voltage
60 Hz, 10 Seconds
750
Vrms
Resistance
10
G
W
Capacitance
25
100
pF
Leakage Current
V
ISO
= 240VAC, 60Hz
2
8.5
m
Arms
Switching Frequency
170
kHz
Frequency Change
Over Line and Load
24
%
Package Weight
3
g
MTTF per MIL-HDBK-217, Rev. F*
Circuit Stress Method
Ground Benign
T
A
= +25°C
7.9
MHr
Fixed Ground
T
A
= +35°C
1.9
MHr
Naval Sheltered
T
A
= +35°C
1.2
MHr
Airborne Uninhabited Fighter
T
A
= +35°C
300
kHr
Moisture Sensitivity Level (MSL)
IPC/JEDEC J-STD-20
2
tempeRatuRe
Speciication
-25
+25
+85
°C
Operation
-40
+100
°C
Storage
-40
+110
°C
SoldeRiNg iNfoRmatioN
The surface mount versions of the HPR1XXWC series are designed for SMT relow soldering.
During this standard process devices should be heated at a rate not to exceed 3 degrees C per
second. The peak relow temperature is 260 degrees C. The device should not be exposed to the
peak temperature ±10 degrees C for more than 12 seconds. The cool down rate for this device
should not exceed 3 degrees C per second.
www.murata-ps.com
Technical enquiries email: sales@murata-ps.com, tel:
+1 508 339 3000
TDC_HPR1xxWC.B01 Page 2 of 4
HPR1XXWC Series
0.75 Watt Single Output DC/DC Converter
typiCal peRfoRmaNCe CuRVeS
Speciications are at T
A
= +25°C nominal input voltage and nominal load.
VOUT VS LOAD
(5Vout Models)
VOUT VS LOAD
(±5Vout Models)
VOUT VS LOAD
(12Vout Models)
5.7
12.5
5.4
12.4
5.5
5.2
12.3
5.3
5.0
12.2
12.1
4.8
5.1
12.0
4.6
4.9
11.9
0
40
80
Output Current (mA)
120
160
0
20
40
60
80
0
20
40
60
80
Output Current each load (mA)
Output Current each load (mA)
VOUT VS LOAD
(±12Vout Models)
VOUT VS LOAD
(15Vout Models)
VOUT VS LOAD
(±15Vout Models)
16.5
12.6
15.9
12.5
16.0
15.7
12.4
15.5
15.5
12.3
15.0
15.3
14.5
12.2
15.1
12.1
14.0
12.0
14.9
13.5
0
10
20
30
40
0
20
40
60
80
0
0.2
0.4
0.6
0.8
1.0
Output Current each load (mA)
Output Current each load (mA)
Output Power each load (Watts)
OSCILLATION FREQUENCY VS
TEMPERATURE
EFFICIENCY VS LOAD
90
75
60
45
30
15
0
220
200
180
160
140
0
20
40
60
80
100
-30
0
30
60
90
% of Rated Load (%)
Temperature (°C)
Safe opeRatiNg aRea
LOAD CAPACITANCE vs INPUT RISE TIME
(5 Vout models)
LOAD CAPACITANCE vs INPUT RISE TIME
(15 Vout models)
600
60
50
500
400
40
30
300
SAFE OPERATING AREA
SAFE OPERATING AREA
20
200
10
100
0
0
0 5 10 15 20 25 30 35 40 45 50
0 5 10 15 20 25 30 35 40 45 50
Rise Time of Input Voltage (mS)
Rise Time of Input Voltage (mS)
LOAD CAPACITANCE vs INPUT RISE TIME
(12 Vout models)
NOTES:
1.) When operated within the SAFE OPERATING AREA as deined by the above curves, the
output voltage of HPR1XXC devices is guaranteed to be within 95% of its steady-state value
within 100 milliseconds after the input voltage has reached 95% of its steady-state value.
2.) For dual output models, total load capacitance is the sum of the capacitances on the
plus and minus outputs.
90
80
70
60
50
40
30
20
10
0
SAFE OPERATING AREA
0 5 10 15 20 25 30 35 40 45 50
Rise Time of Input Voltage (mS)
www.murata-ps.com
Technical enquiries email: sales@murata-ps.com, tel:
+1 508 339 3000
TDC_HPR1xxWC.B01 Page 3 of 4
HPR1XXWC Series
0.75 Watt Single Output DC/DC Converter
meCHaNiCal
paCKage/piNout “W”
Smd paCKage
0.785±0.010"
(19.94±0.25)
14 13
11 10
98
top VieW
0.695±0.015"
(17.65±0.38)
0.525±0.010"
(13.34±0.25)
1
2
3
4
5
6
7
0.375±0.005"
(9.52±0.13)
Side VieW
0.015±0.005"
(0.38±0.13)
0.020±0.002"
(0.51±0.05)
0.100±0.010"
(2.54±0.25)
bottom VieW
0.014±0.002"
(0.36±0.05)
.015±.010"
(.38±.26)
PIN CONNECTIONS
piN# SiNgleS dualS
NoteS:
NC = Do Not Connect.
Duplicate pin functions are internally connected.
All dimensions are in inches (millimeters).
GRID: 0.100 inches (2.54 millimeters)
MATERIAL: Lead material is phosphor bronze; lead
inish is 100-300 microinches of matte tin over a
nickel barrier layer of 5-40 microinches.
piN# SiNgleS dualS
1
+VIN
+VIN
7
+VOUT
+VOUT
2
-VIN
-VIN
8
NC
NC
3
NC
NC
9
NC
NC
4
NC
NC
10
NC
NC
5
-VOUT
-VOUT
11
NC
NC
6
NC
Common
13
NC
NC
14
NC
NC
oRdeRiNg iNfoRmatioN
abSolute maximum RatiNgS
HpR
1xx
W
C
Device Family
HPR Indicates DC/DC Converter
Model Number
Selected from Table of Electrical Characteristics
Package Option
W = SMD Package
Internal Power Dissipation ........................................ 450mW
Short Circuit Duration................................................ Momentary
RoHS Compliant Version
USA: Mansield (MA), Tel: (508) 339-3000, email: sales@murata-ps.com
Canada: Toronto, Tel: (866) 740-1232, email: toronto@murata-ps.com
UK: Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com
France: Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com
Germany: München, Tel: +49 (0)89-544334-0, email: munich@murata-ps.com
Japan:
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansield, MA 02048-1151 U.S.A.
Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356
www.murata-ps.com email: sales@murata-ps.com
ISO 9001 REGISTERED
Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com
Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com
Website: www.murata-ps.jp
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Speciications are subject to change without
notice.
China:
Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com
Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com
© 2008 Murata Power Solutions, Inc.
05/09/08
www.murata-ps.com
Technical enquiries email: sales@murata-ps.com, tel:
+1 508 339 3000
TDC_HPR1xxWC.B01 Page 4 of 4
[ Pobierz całość w formacie PDF ]