tecra te2000, Toshiba
[ Pobierz całość w formacie PDF ]
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
TE2000
GENERAL INFORMATION
Tools Required for Proper
Disassembly and Reassembly:
1. Phillips Screwdriver (Size 0&1)
2. Flat head Screwdriver
3. Security Torx (Size 7)
4. Case Separator
5. ESD Wrist Strap
6. ESD mat
7. Tweezers
Before attempting any of the following procedures,
make sure that the main battery and AC adaptor is
not connected to the unit and the environment in
which you are working on is protected from
Electro-Static Discharge(ESD).
TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
TE2000
TABLE OF CONTENTS:
TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
TE2000
BATTERY PACK REMOVAL
OPTIONAL PC CARD REMOVAL
Battery
Lock
Release
lever
Battery
Pack
PC card
Eject button
1. Turn the computer upside down as shown.
2. Slide the battery lock to unlock position.
3. Slide
battery release lever
in the direction of the
arrow.
3. Lift out the
battery
.
1. Press the
eject button
of the PCCard you want to
remove.
2. Press the extended eject button to pop the
PC card
out.
3. Grasp the
PC card
and remove it.
Note: Before removing any PC Card device, make
sure it is “STOPPED” in the PC Card manager.
SELECT BAY REMOVAL
CD-R/DVD-ROM DRIVE DISASSEMBLY
CD-R/DVD-ROM
drive
Base cover
Connector
M2x3 silver
flat head
screws
Connector cover
Release lever
Select bay
device
M2x8 silver
screws
1. Turn the computer upside down.
2. Slide the
release lever
in the direction of the arrow.
3. Pull out the
select bay device
in the direction of the
arrow.
1. Remove
five M2x3 silver flat head screws
securing
the base cover and lift out the
cover
.
2. Remove
two M2x8 silver screws
securing the
connector cover.
3. Remove the
connector cover
and the
connector
from the CD-R/DVD-ROM drive.
TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
TE2000
MEMORY MODULE REMOVAL
Memory
slot cover
M2.5x4
black
screws
Memory clips
1. Turn the computer upside down.
2. Remove
two
M2.5x4 black screws
securing the
memory cover.
3. Lift out the
memory slot cover
.
4. Spread the
memory clips
outward and pull the
memory module
out of the connector on a
45 degree angle.
MODEM BOARD REMOVAL
M2x4 silver screws
Modem
harness
Modem slot
cover
M2.5x4 black screw
Modem board
1. Remove
one M2.5x4 black screw
securing the modem
slot cover.
2. Insert your finger nail or the case separator into the
notched side of the cover and lift up to release the two
latches securing the left side of the modem slot cover.
3. Disconnect the
modem harness
from the modem
board.
4. Remove
two
M2x4 silver screws
securing the
modem board.
5. Lift up the
modem board
to disconnect it from the
system board.
TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
TE2000
HDD REMOVAL
HDD cover
M2.5x6 black screw
Plastic Tab
HDD pack
1. Turn the computer upside down.
2. Remove
one M2.5x6 black screw
securing
HDD cover.
3. Remove the
HDD cover
.
4. Unfold the
plastic tab
and pull to remove the HDD
from the bay.
HDD REMOVAL
KEYBOARD REMOVAL
HDD bracket
HDD
M3x4 brass flat head screws
M2.5x12 black screws
5. Remove
two M3x4 brass flat head screws
securing
the HDD to the bracket and remove the HDDbracket.
1. Turn the computer upside down.
2. Remove
two M2.5x12 black screws
securing the
keyboard holder.
TOSHIBA
Tough Enough for Today’s World.
[ Pobierz całość w formacie PDF ]